Sikaflex 1c SL Polyurethane Sealant, 29 fl oz Cartridge, 3 Tubes

Description

Sikaflex 1c SL Polyurethane Sealant, 29 fl oz Cartridge, 3 Tubes
Sikaflex-1c SL
is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity.
Sikaflex 1c SL
can be used in concrete joint 24 hours after the concrete is poured and also in damp concrete applications. Sikaflex-1c SL is used to seal horizontal expansion joints and control joints in concrete and cementitious slabs such as sidewalks and high traffic entrances, parking lots, balconies, pavements, terraces, warehouses, factories, and plazas.
Color: Limestone
Meets Federal Specification TT-S-00230C, Type I, Class A. Meets ASTM C-920, Type S, Grade P, Class 25, use T,M, A, G, I.
This listing is for 3 - 29 fl. oz. cartridges that fit most large caulking guns.
Benefits
1 component, no mixing
Self-leveling, pourable
Accelerated curing
Permanently elastic
High durability
Excellent resistance to point loads
Use in concrete joints 24 hours after concrete is poured
Use in damp joints 60 minutes after water source is stopped
Resists aging, weathering
Excelent adhesion
Convenient, easy to use packaging
Jet fuel resistant
For a 29 fl. oz. cartridge
1/4" bead will yield 69.8 ft. of sealant
3/8" bead will yield 31-46 ft. of sealant
1/2" bead will yield 17.4-34.9 ft of sealant
3/4" bead will yield 11.6-23.3 ft of sealant
Application and Use
Use between 40° and 100°F, in cool weather store at room temperature for 24 hours prior to use. For best performance apply Sikaflex when joint is at mid-point of its expansion and contraction. Apply sealant with steady pressure, forcing the sealant into the joint. Sealant should be applied to both sides of joint, use bond breaker tape to prevent bond at base of joint. If the depth of the joint exceeds 1/2" use of a backer rod is recommended. Tool sealant to ensure full contact with joint walls and remove trapped air. Do not tool with detergent or soap solutions. Tooling results in a correct bead shape, a neat joint and maximum adhesion.
Allow 1 week cure when using Sikaflex 1c SL in total water immersion situations.