RadonSeal Plus Concrete Sealer (2.5 gal) – Waterproofs & Strengthens Concrete

Description

RadonSeal® Plus Deep-Penetrating Concrete Sealer (5-gal) -
Concrete Waterproofing & Radon Mitigation In One! | Seals Concrete Permanently Against Basement Moisture
RadonSeal® has been the most trusted and widely-used concrete sealer for both construction and residential projects. RadonSeal is a reactive, internal sealer for concrete, mortar, and other cementitious materials. The sealer penetrates deep into concrete
(up to 4")
, reacts, expands inside the concrete pores and cures as a hard silicate mineral.
THE SEAL IS PERMANENT!
Unlike common surface sealers
(membrane coatings)
or waterproofing paints sold in stores, RadonSeal will never peel off or wear away. There is no need to ever reapply the product again! Once RadonSeal has cured inside the concrete, it can not be pushed out regardless of hydrostatic pressure. The seal becomes integral to the concrete providing hardness and durability.
Think of it like injecting more cement into the concrete!
BACKED BY A LIFETIME MONEY-BACK GUARANTEE!
RadonSeal® Plus seals concrete floors and heavyweight concrete blocks, indoors or outdoors. Strengthens and preserves concrete. Prevents concrete pitting and spalling due to freeze-thaw, road salts, and chemicals. Hardens the surface. Stops efflorescence and concrete dusting.
USE TO WATERPROOF CONCRETE WALLS AND FLOOR
– RadonSeal is the heaviest available silicate-based sealer, which penetrates deeper, carries more active minerals, and seals tighter than any other concrete sealer. The penetration does not depend on gravity – it is also used on walls and ceilings. In case of basement walls, RadonSeal is normally applied to interior walls to seal against water seepage, water vapor, and radon gas from the ground. However, if there is an opportunity to apply it to the outside, it has the added advantage of preserving the exterior of the concrete and extending the life of waterproofing coating.
USE BEFORE PAINTING CONCRETE
– Because RadonSeal protects concrete against water vapor, efflorescence, and the "alakli attack" it is commonly used by flooring contractors to waterproof the concrete first. RadonSeal is suitable for use before applying paints, adhesives, epoxy floor coatings, concrete overlays, surface levelers, membrane "wet-look" coatings and before the installation of moisture sensitive flooring.
USE TO STRENGTHEN CONCRETE
–
Once cured, RadonSeal makes concrete denser and stronger
(up to 40% in flexural strength)
. Use on concrete surfaces to reduce dusting, crumbling, and overall wear.
Safe and easy spray-on application for homeowners or contractors.
Environment-friendly, non-hazardous sealer with no fumes or noxious odors. Contains zero VOCs.
COVERAGE:
2 applications will cover 400-600 sq. ft. for poured concrete.
3 applications will cover 250 sq. ft. for concrete blocks
4 applications will cover 200 sq. ft. for cinder blocks
APPLICATION:
Hand-pump "garden" sprayer, or roller
(3/4" nap)
* Not recommended for use on colored concrete, fiber-reinforced concrete, stamped concrete.
* Visit the RadonSeal.com website for detailed information.
Thank you for your business!
RadonSeal®