RadonSeal DIY Concrete Crack Repair Kit (20-ft) - For Poured Concrete Walls

Description

T
he Homeowner's Solution To Repairing Foundation Cracks
RadonSeal® Do-It-Yourself Concrete Foundation Repair Kits
(20 ft.)
If you have cracks in your poured concrete foundation wall, you're not alone. Most houses, both new and old, develop some foundation cracks. If the cracks aren't leaking, it is only a matter of time as the exterior waterproofing gradually deteriorates. If your basement cracks are already leaking, now is the time to repair them to avoid further water damage and possible mold growth.
Concrete Crack Repair Made Simple
–
Don't waste your time or money. Our low-pressure DIY Foundation Crack Repair Kits make crack repair easy and inexpensive. Already used by thousands of homeowners and contractors our crack injection method will fill the entire depth and length of the crack and stopping water leaks permanently!
These kits use the same two-component polyurethane or epoxy for injection as our professional toolkits for contractors. Two-component injection polymers are used by practically all contractors because they provide a superior crack repair that will last forever. No special skills are required - just a little bit of patience on your end.
Cheaper kits use single-component, hydrophilic foams that absorb water but eventually crumble after repeated drying.
Once injected, our proprietary, two-component polyurethane expands forcefully to fill the entire crack with hydrophobic foam that repels water and WILL NOT BREAK DOWN, as proven over many years. Your foundation crack will never leak again because water cannot get into it.
• NO SPECIAL TOOLS REQUIRED
–
The kits come complete. You just need a standard caulking gun to inject.
• NO DRILLING REQUIRED –
The low-pressure injection method eliminates the need for drilling.
• WORKS ON HAIRLINE CRACKS
–
Low viscosity urethane is suitable even for the repair of hairline cracks.
• NO NEED TO EXCAVATE
–
Save serious money by repairing the crack from the inside.
Coverage
–
On average, each DIY Crack Injection Repair Kit is able to fill up to 20 linear feet of cracks in poured concrete walls from hairline to 1/2" wide (up to 22" thick walls).
Surface Sealer
–
You also have the choice of the standard epoxy surface sealer when the wall will be framed in but if appearance matters, use the Easy-Peel version which the surface sealer can be easily removed after the repair.
Thank you for your interest!
RadonSeal®