-40%

DAMAGED: Dayton Direct Drive Blower Motor 4YU34, 115V, 1550 RPM, for Ventilator

$ 31.65

Availability: 28 in stock
  • Model: 4YU34
  • Type: Direct Drive Blower Motor
  • Item must be returned within: 30 Days
  • Power Phase: 1 Phase
  • All returns accepted: Returns Accepted
  • Amperage: 2.6 A
  • Restocking Fee: No
  • Compatible Model: 4YC66
  • Compatible Brand: For Dayton
  • MPN: 4YU34
  • Return shipping will be paid by: Buyer
  • Voltage: 115 V
  • Condition: Never fully installed, however the low speed setting does NOT work; only the medium and high speed lines function properly. The red/low speed line is open. In addition, there is some noise and vibration present when the motor is running. Actual item for sale pictured.
  • Refund will be given as: Money Back
  • Power Source: Corded Electric
  • Brand: Dayton

    Description

    Never fully installed, however the low speed setting does
    NOT
    work; only the medium and high speed lines function properly. The red/low speed line is open. In addition, there is some noise and vibration present when the motor is running. Actual item for sale pictured.
    Technical Specifications
    Direct Drive Blower Motor
    Motor Application: HVAC/R
    Motor Sub Application: Direct Drive Fan/Blower
    Phase: Single
    Motor Design: Permanent Split Capacitor
    HP: 1/8
    Nameplate RPM: 1,550/1,300
    Number of Speeds: 3
    Voltage: 115V AC
    Full Load Amps: 2.6
    Frame: 42Y
    Replacement For:
    4YC66
    4YC67
    5DVP6
    5DVP7
    Usable @ 208V: No
    Usable @ 200V: No
    Motor Thermal Protection: Auto
    Hz: 60
    Motor Service Factor: 1
    Insulation Class: A
    Motor Shaft Rotation: CCWSE
    Maximum Ambient Temperature: 40° C
    Duty Cycle: Continuous
    Motor Enclosure Design: Open Air-Over
    Motor Mounting Type: Stud
    Motor Mounting Position: All Angle
    Number of Shafts: 1
    Shaft Diameter: 1/2"
    Shaft Length: 2-3/4"
    Motor Bearings: Ball
    Motor Shaft Design Flat
    Length Less Shaft: 3-5/8"
    Mounting Holes: (4) #10-32
    Body Diameter: 5-1/8"
    Stud Quantity: 4
    Mounting Stud Pattern: 2-3/4" x 2-3/4"
    Bolt Circle Diameter: 3-7/8"
    Mounting Stud Location: Shaft End
    Stud Size: #10-32
    Standards: CSA Certified (LR43381), CSA Certified Motor, UL Recognized: (E62788/E62862)
    Capacitor Required: Yes
    Includes: Mounted 5 MFD 370VAC Capacitor
    MSRP: 7.28