36 TUBES Chemlink M1 BLACK Structural Sealant - 10.1 oz Cartridge - ChemLink M-1

Description

36 TUBES Chemlink M1 BLACK Structural Sealant - 10.1 oz Cartridge - ChemLink M-1
M-1® Universal Adhesive/Sealant BLACK (36 - 10.1 oz Tubes)
M-1 adheres to a wide range of construction materials including PVC, EPDM, most metals, wood, glass, masonry concrete, fiberglass and solvent-sensitive foams so it is works in almost any situation requiring a sealant. Yet it delivers nearly 400 psi shear strength and remains elastic after cure—up to 525% elongation, so it also performs as a structural adhesive.
Commercial Roofing:
Repair of flashing and coping joints, sealing reglet joints and termination bars, night seals around penetrations, bonding walkway treads and just about any type of emergency roof repairs.
Residential Roofing
: Chimney and step flashing, skylights, roofing details, cove joints. Penetrations: Sealing pipe, cable, conduit penetrations through walls and roofs. Walls, windows, doors: Masonry and curtain wall construction.
Lightning protection:
Bonding grounding cables Solar: Mounting solar panels, assembling components, waterproofing power distribution
Masonry and concrete:
Crack repairs, horizontal and vertical expansion joints, bonding metal brackets
Mechanical:
Sealing ducts, insulation, flanges and piping Sealing termination bars
M-1 Advantages
Non-shrinking
No solvents – non-toxic – no odor – no risk to human health
Applies down to 32°F/0°C
Continuous service at 200° F/93°C
Effective on damp surfaces
Skins over in 30 minutes
Paintable
Non-slump, applies vertically and overhead
Good color stability, UV stable
Gun grade, no special tools or mixing required
Application Performance Standards:
• ASTM C920, Type S, Grade NS, Class 35
Uses NT, T1, M, G, A & O
• ASTM E84, Class A
• Federal Specification TT-S-00230-C Type II, Class B
• Corps of Engineers CRD-C-541, Type II, Class B
• Canadian Standards Board CAN 19, 13-M82
Regulatory Compliance
Conforms to OTC Rule for Sealants and Caulks
Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
This product does not contain cancer causing chemicals listed in California Proposition 65
Conforms to USDA Requirements for Non-food Contact
Green Standards:
LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
NAHB Model Green Home Building Guidelines: 5 Global Impact Points
VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
M-1® Universal Adhesive/Sealant BLACK (36 - 10.1 oz Tubes) M-1 adheres to a wide range of construction materials including PVC, EPDM, most metals, wood, glass, masonry concrete, fiberglass and solvent-sensitive foams so it is works in almost any situation requiring a sealant. Yet it delivers nearly 400 psi shear strength and remains elastic after cure—up to 525% elongation, so it also performs as a structural adhesive. ---Commercial Roofing: Repair of flashing and coping joints, sealing reglet joints and termination bars, night seals around penetrations, bonding walkway treads and just about any type of emergency roof repairs. ---Residential Roofing: Chimney and step flashing, skylights, roofing details, cove joints. Penetrations: Sealing pipe, cable, conduit penetrations through walls and roofs. Walls, windows, doors: Masonry and curtain wall construction. ---Lightning protection: Bonding grounding cables Solar: Mounting solar panels, assembling components, waterproofing power distribution ---Masonry and concrete: Crack repairs, horizontal and vertical expansion joints, bonding metal brackets ---Mechanical: Sealing ducts, insulation, flanges and piping Sealing termination bars M-1 Advantages ---Non-shrinking ---No solvents – non-toxic – no odor – no risk to human health ---Applies down to 32°F/0°C ---Continuous service at 200° F/93°C ---Effective on damp surfaces ---Skins over in 30 minutes ---Paintable ---Non-slump, applies vertically and overhead ---Good color stability, UV stable ---Gun grade, no special tools or mixing required Application Performance Standards: ---• ASTM C920, Type S, Grade NS, Class 35 Uses NT, T1, M, G, A & O • ASTM E84, Class A • Federal Specification TT-S-00230-C Type II, Class B • Corps of Engineers CRD-C-541, Type II, Class B • Canadian Standards Board CAN 19, 13-M82 Regulatory Compliance ---Conforms to OTC Rule for Sealants and Caulks ---Meets requirements of California Regs: CARB, BAAQMD and SCAQMD ---This product does not contain cancer causing chemicals listed in California Proposition 65 ---Conforms to USDA Requirements for Non-food Contact Green Standards: ---LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point ---NAHB Model Green Home Building Guidelines: 5 Global Impact Points ---VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)
36 TUBES Chemlink M1 BLACK Structural Sealant - 10.1 oz Cartridge - ChemLink M-1
M-1® Universal Adhesive/Sealant BLACK (36 - 10.1 oz Tubes)
M-1 adheres to a wide range of construction materials including PVC, EPDM, most metals, wood, glass, masonry concrete, fiberglass and solvent-sensitive foams so it is works in almost any situation requiring a sealant. Yet it delivers nearly 400 psi shear strength and remains elastic after cure—up to 525% elongation, so it also performs as a structural adhesive.
Commercial Roofing:
Repair of flashing and coping joints, sealing reglet joints and termination bars, night seals around penetrations, bonding walkway treads and just about any type of emergency roof repairs.
Residential Roofing
: Chimney and step flashing, skylights, roofing details, cove joints. Penetrations: Sealing pipe, cable, conduit penetrations through walls and roofs. Walls, windows, doors: Masonry and curtain wall construction.
Lightning protection:
Bonding grounding cables Solar: Mounting solar panels, assembling components, waterproofing power distribution
Masonry and concrete:
Crack repairs, horizontal and vertical expansion joints, bonding metal brackets
Mechanical:
Sealing ducts, insulation, flanges and piping Sealing termination bars
M-1 Advantages
Non-shrinking
No solvents – non-toxic – no odor – no risk to human health
Applies down to 32°F/0°C
Continuous service at 200° F/93°C
Effective on damp surfaces
Skins over in 30 minutes
Paintable
Non-slump, applies vertically and overhead
Good color stability, UV stable
Gun grade, no special tools or mixing required
Application Performance Standards:
• ASTM C920, Type S, Grade NS, Class 35
Uses NT, T1, M, G, A & O
• ASTM E84, Class A
• Federal Specification TT-S-00230-C Type II, Class B
• Corps of Engineers CRD-C-541, Type II, Class B
• Canadian Standards Board CAN 19, 13-M82
Regulatory Compliance
Conforms to OTC Rule for Sealants and Caulks
Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
This product does not contain cancer causing chemicals listed in California Proposition 65
Conforms to USDA Requirements for Non-food Contact
Green Standards:
LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
NAHB Model Green Home Building Guidelines: 5 Global Impact Points
VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
M-1® Universal Adhesive/Sealant BLACK (36 - 10.1 oz Tubes)
M-1 adheres to a wide range of construction materials including PVC, EPDM, most metals, wood, glass, masonry concrete, fiberglass and solvent-sensitive foams so it is works in almost any situation requiring a sealant. Yet it delivers nearly 400 psi shear strength and remains elastic after cure—up to 525% elongation, so it also performs as a structural adhesive.
Commercial Roofing:
Repair of flashing and coping joints, sealing reglet joints and termination bars, night seals around penetrations, bonding walkway treads and just about any type of emergency roof repairs.
Residential Roofing
: Chimney and step flashing, skylights, roofing details, cove joints. Penetrations: Sealing pipe, cable, conduit penetrations through walls and roofs. Walls, windows, doors: Masonry and curtain wall construction.
Lightning protection:
Bonding grounding cables Solar: Mounting solar panels, assembling components, waterproofing power distribution
Masonry and concrete:
Crack repairs, horizontal and vertical expansion joints, bonding metal brackets
Mechanical:
Sealing ducts, insulation, flanges and piping Sealing termination bars
M-1 Advantages
Non-shrinking
No solvents – non-toxic – no odor – no risk to human health
Applies down to 32°F/0°C
Continuous service at 200° F/93°C
Effective on damp surfaces
Skins over in 30 minutes
Paintable
Non-slump, applies vertically and overhead
Good color stability, UV stable
Gun grade, no special tools or mixing required
Application Performance Standards:
• ASTM C920, Type S, Grade NS, Class 35
Uses NT, T1, M, G, A & O
• ASTM E84, Class A
• Federal Specification TT-S-00230-C Type II, Class B
• Corps of Engineers CRD-C-541, Type II, Class B
• Canadian Standards Board CAN 19, 13-M82
Regulatory Compliance
Conforms to OTC Rule for Sealants and Caulks
Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
This product does not contain cancer causing chemicals listed in California Proposition 65
Conforms to USDA Requirements for Non-food Contact
Green Standards:
LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
NAHB Model Green Home Building Guidelines: 5 Global Impact Points
VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)